Switch cabinet heating
- Elevating Systems
- Facility Management
- Current monitoring
- Monitoring the switch cabinet heater for defects.
- Current monitoring and temperature monitoring in the switch cabinet ensures that the temperature in the switch cabinet rises from - 40°C to - 10°C before the basket can be operated. When the temperature is too low, the function of the components in the switch cabinet cannot be ensured, and the safe operation of the basket is not guaranteed.
- - This monitoring allows repairs be be made by basket at - 40°C.
May I help you?
Can't find what you're looking for? Please don't hesitate to contact me.
This might be of interest for you
No entries found.
Leak detection, defective pipes
V4LM4S30 24–240V AC/DC Artikel Nr.: 2104500 Leaks in water tanks or pipes for water, water-soluble liquids or cleaning lyes usually cause serious damage in…
Rotation direction monitoring for heat pumps
A heat pump should be protected against rotation in the wrong direction. If the phase sequence is incorrect, the pump must not be switched on. If a phase fails…
Charge measurement for energy storage devices
Save and fully isolated measurement of DC energy packs VEO Series V4IA100A 24-240V AC/DC For battery power packs in energy storage devices, peak power systems…
Panel heating monitoring
Monitoring of panel heaters for failure.
Loading docklight control
The light on the loading dock and in the warehouse is often on all night even though no one needs it.
Power source switchover
When the voltage falls below 0.85 times the nominal voltage for longer than 0.5 seconds, the system must switch over from the normal power supply to the…