Sty ventilation system monitoring
- Facility Management
- Ventilation Systems
- Voltage monitoring
- The ventilation of a pigsty must be ensured. If the system fails, the animals could die.
- The E3YF400 is used to monitor the supply voltage of the ventilation system. In the event of a power failure, the emergency power supply for the system is switched on immediately. An alarm is also sounded in the main building.
- - Ensuring ventilation through the activation of the emergency power system, thereby preventing the suffocation of the animals
May I help you?
Can't find what you're looking for? Please don't hesitate to contact me.
This might be of interest for you
No entries found.
Charge measurement for energy storage devices
Save and fully isolated measurement of DC energy packs VEO Series V4IA100A 24-240V AC/DC For battery power packs in energy storage devices, peak power systems…
Fountain fill level
The fill level must be monitored in fountains so that the water pump can be activated when the water level is too low.
The slippage or breakage of a V-belt should be signalled to a control room.
Furnace feed screw
Sequential control of 2 feed screws for a wood chip heating system.
Lift equipment service
A wide range of different control and supply voltages are used for conveyor and transport systems. The maintenance of expensive inventories of replacement parts…
Sorting system lighting
Monitoring the lights in quartz and stone sorting systems for failure/faults.