Power failure monitoring CNC milling machine
- Industrial Plant
- Machine Tools
- Data sheet:
- The customer wants to optimize manufacturing quality in series production and reduce the reject rate, i.e. when milling parts. To achieve this, it is essential to detect brief power failures, one of the things that can lead to problems.
- In order to detect momentary power failures in a CNC machining center, the system is equipped with the TELE V2UF230V10 voltage-drop detector. Power failures pass through the relay output of the monitoring components to the digital input of a PLC. Then they are given a time stamp and logged. This makes the voltage-drop detector an economical alternative to direct monitoring with the PLC.
- • Detection of momentary power failures
• Optimization of manufacturing quality
• Reduce reject rate
• Cost efficiency
May I help you?
Can't find what you're looking for? Please don't hesitate to contact me.
This might be of interest for you
No entries found.
Baking time control
Pre-baked, frozen breads are finished in an oven for consumption.
Pulp manufacturecurrent measurement
Multiple motors are controlled by a frequency converter. The frequency converter can only measure the total current, but not the power draw of the individual…
Electric winch monitoring
An electric winch should be protected against overload.
Manure removal systememergency stop
Monitoring of the manure removal system. The conveyor system must switch off when it is blocked by animals or a stoppage.
Thrust overload protection, coal unloading facility
Das Schubniveau, das ein elektromechanischer Antrieb entwickelt, steht in direktem Zusammenhang mit der elektrischen Leistungsaufnahme des Stellmotors. Durch…
Bandsaw splitting machine
A bandsaw splitting machine is used where blocks and panels of rubber and PE foam are to be cut in half or into thin layers.