- Energy distribution
- Correct phase sequence and defined shutdown in the event of undervoltage.
- The G2PU690VS20 is used to ensure the correct phase sequence for rectifier stations and to ensure a defined shutdown in the event of undervoltage.
- - Secure shutdown in the event of undervoltage and incorrect rotary field
This might be of interest for you
No entries found.
Start-up suppression for DC motors
The starting resistor of a DC motor has to be bypassed for regular operations, but no additional control voltage is available.
Natural gas system monitoring
Plant faults due to power supply problems should be prevented.
Load status monitoring
The rotor blades of a wind turbine have to be turned out of the wind in the event of a problem. A battery is used for this. Therefore, the battery must be…
Safe grid separation for photovoltaic systems
Grid and system protection from TELE safely separates photovoltaic systems from the grid in the event of a fault. The unit is programmable, making it suitable…
Monitoring of the operating state of the belt scraper. The belt scraper could get blocked. This can cause the drive chain to become damaged or break.
Monitoring emergency lighting system
An undervoltage monitoring relay with a fixed switching threshold at 0.85% of the nominal voltage is needed for emergency lighting systems. Two changeover…