Pipe system cleaning
- Product category:
- Timing Relays
- Other Applications
- Impulse function
- Chemical deposits are to be removed from pipe networks mechanically by means of different compressed air and water pressure impulses.
- The impulse duration for compressed air and water is controlled by a timing relay, and can be set at the operating panel by means of an R2 remote potentiometer. The impulse strength is controlled manually by means of control valves
- - The various impulses can be set outside the system using remote potentiometers – rapid adjustment when the mixed impulses need to be changed
- Compact distributor module
May I help you?
Can't find what you're looking for? Please don't hesitate to contact me.
This might be of interest for you
No entries found.
Feed pump monitoring
The feed pump at a natural gas fuel station must be monitored for dry running. If no LNG is being pumped, the pump must be switched off.
With the TELE voltage monitoring device critical electrical states such as undervoltage, asymmetry and phase failure are easily detected.
Manure removal systememergency stop
Monitoring of the manure removal system. The conveyor system must switch off when it is blocked by animals or a stoppage.
Wine press monitoring
In wine presses, phase sequence faults and phase failures cause serious problems and damage.
Grapevine pest control
For pest control, a mechanical switch is actuated at each grapevine. The nozzle should then be activated for a certain time to spray the respective substance…
Grain storage ventilation system
The drive motor of a mixing feed screw in a grain storage facility is to be protected against incorrect phase sequences when it is connected to the power…