Natural gas system monitoring
- Process industry
- Plant faults due to power supply problems should be prevented.
- The monitoring relay monitors the supply voltage of all 3 phases in the switch cabinet.
To prevent undefined operating states, the natural gas system is switched off in the event of a phase failure, and a service technician is informed of the fault by means of a GSM modem.
- - Rapid recognition of system faults to prevent possibly dangerous undefined operating states
This might be of interest for you
No entries found.
Monitoring emergency lighting system
An undervoltage monitoring relay with a fixed switching threshold at 0.85% of the nominal voltage is needed for emergency lighting systems. Two changeover…
Emergency power monitoring
Phase failure for the operating theatre ventilation systems in hospitals is to be recognized as quickly as possible and the system is to be switched over to an…
Peak load detection
An emergency power generator starts in the event of a mains failure.
Rotation direction monitoring for heat pumps
A heat pump should be protected against rotation in the wrong direction. If the phase sequence is incorrect, the pump must not be switched on. If a phase fails…
Safe grid separation for photovoltaic systems
Grid and system protection from TELE safely separates photovoltaic systems from the grid in the event of a fault. The unit is programmable, making it suitable…
Optimising energy consumption
Optimised use of energy from a photovoltaic system.