Mobile communications transmitter station
- Communication Technology
- Other Applications
- Voltage monitoring
- System faults and failures in mobile communications transmitter stations as a result of poor power supply quality (undervoltage, phase failure) should be detected and indicated.
- The voltage relay reliably detects phase failures and undervoltage below the configured threshold and indicates the power supply fault at the control centre via the internal communication system. An emergency generator is switched on, a service technician is sent to the site, or an alternate radio station is taken into operation.
- - Rapid detection of system faults, and therefore improved mobile communications network quality
- Compact size and separate display for the fault for each phase, configurable undervoltage threshold depending on the customer and system needs
May I help you?
Can't find what you're looking for? Please don't hesitate to contact me.
This might be of interest for you
No entries found.
Grain storage ventilation system
The drive motor of a mixing feed screw in a grain storage facility is to be protected against incorrect phase sequences when it is connected to the power…
Save stove shut down
Time relais avoids unsafe condition in case of impact button blockade E1ZM10 24-240 To avoid fire hazard, the stove in the shared kitchen of a residential home…
Backdrop and light hoist
The overloading of theatre backdrop and light hoists should be prevented.
Pipe system cleaning
Chemical deposits are to be removed from pipe networks mechanically by means of different compressed air and water pressure impulses.
Current monitoring for pump stations
Plug-in monitoring relays are installed in the pump stations of many hydropower plants. These devices are intended to allow for quick and safe replacement in…
In a meat processing plant, a fluid is to be injected into the meat for a certain period of time at certain intervals.