- Cleaning, Washing
- Industrial Plant
- Portable, 3-phase industrial vacuums that are supplied with power through a plug may not start when the phase sequence is incorrect or a phase has failed.
If a phase fails during operation, the vacuum should switch off.
- The voltage monitor detects the phase sequence and phase failure, while monitoring the asymmetry detects the failure of a phase.
Even when reverse voltage is generated when the motor continues to run on two phases.
- - The compact size with a width of only 17.5 mm saves space for mobile applications
May I help you?
Can't find what you're looking for? Please don't hesitate to contact me.
This might be of interest for you
No entries found.
Short-circuit protectionfor shaft furnaces
The short-circuit proof Gefran thyristor controller from TELE increases the availability of plant furnaces, such as a shaft furnaces for gaseous nitriding.
When the lights fail in public buildings (such as schools) because of undervoltage, the emergency lighting systems must be activated in publicly accessible…
Industrial vacuum filter cleaning
The filters in industrial vacuums become clogged after a time. The vacuum is run in alternating suction and pressure mode to clean the filter.
Pulp production datacollection
Monitoring of the production line for cellulose fibre. The operating data for the conveyor belt drive motors must be collected and sent to the higher-level…
Lathe chip conveyor
System shutdown in the event of overload and blockage.
Train washing system
The pressure applied by the cleaning brush in a train washing system should remain as constant as possible to ensure optimal cleaning.