Industrial vacuum filter cleaning
- Product category:
- Timing Relays
- Cleaning, Washing
- Industrial Plant
- The filters in industrial vacuums become clogged after a time. The vacuum is run in alternating suction and pressure mode to clean the filter. It should be possible to change the intervals without changing the process control program.
- The different intervals for suction and pressure operation are effected with a clock generator, and can be adjusted by the end user.
- - Small size allows installation in tight spaces
- End user can set the intervals as needed
May I help you?
Can't find what you're looking for? Please don't hesitate to contact me.
This might be of interest for you
No entries found.
Frequency converter control
A frequency converter controls a conveyor belt motor. The frequency converter is controlled by a 4–20 mA signal from a PLC. Monitoring of a 4–20 mA control…
Short-circuit protectionfor the production ofblow-molded containers
The short-circuit proof Gefran thyristor controller from TELE increases availability for the manufacture of blow-molded containers.
Electronic load shedding relay prevents overloads
TELE relais prevents operation of more than one high-load consumer at a time E1IM10AACL10 When running several electrical consumers simultaneously, such as…
A blockage of the shredder blades should be recognised quickly.
Power failure monitoring CNC milling machine
In order to detect momentary power failures in a CNC machining center, the system is equipped with the TELE V2UF230V10 voltage-drop detector.
Wine press monitoring
In wine presses, phase sequence faults and phase failures cause serious problems and damage.