Grapevine pest control
- Product category:
- Timing Relays
- Process industry
- For pest control, a mechanical switch is actuated at each grapevine. The nozzle should then be activated for a certain time to spray the respective substance onto the grapevine.
- With the “single shot trailing edge with control contact” function, the time can be set in the relay depending on the quantity to be sprayed. This ensures that the quantity applied per grapevine can be adapted to the speed of the vehicle.
- - Universal voltage (vehicle electrical system)
- Easy for the user to adjust
- Clear operating displays
- Precise metering
This might be of interest for you
No entries found.
Save stove shut down
Time relais avoids unsafe condition in case of impact button blockade E1ZM10 24-240 To avoid fire hazard, the stove in the shared kitchen of a residential home…
Current monitoring for pump stations
Plug-in monitoring relays are installed in the pump stations of many hydropower plants. These devices are intended to allow for quick and safe replacement in…
Feed pump monitoring
The feed pump at a natural gas fuel station must be monitored for dry running. If no LNG is being pumped, the pump must be switched off.
Pipe system cleaning
Chemical deposits are to be removed from pipe networks mechanically by means of different compressed air and water pressure impulses.
Baking time control
Pre-baked, frozen breads are finished in an oven for consumption.
Safe grid separation for small hydroelectric power plants
Grid and system protection from TELE safely separates small hydroelectric power plants from the grid in the event of a fault. The unit is programmable, making…