- Industrial Plant
- cos phi
- Monitoring of a fan motor for V-belt breakage or slippage.
- The “under” function of the monitoring device measures the slippage or breakage of the V-belt.
- - Immediate detection of a fault
- System downtime is reduced to a minimum
May I help you?
Can't find what you're looking for? Please don't hesitate to contact me.
This might be of interest for you
No entries found.
Industrial vacuum filter cleaning
The filters in industrial vacuums become clogged after a time. The vacuum is run in alternating suction and pressure mode to clean the filter.
Frequency converter control
A frequency converter controls a conveyor belt motor. The frequency converter is controlled by a 4–20 mA signal from a PLC. Monitoring of a 4–20 mA control…
Mobile communications transmitter station
System faults and failures in mobile communications transmitter stations as a result of poor power supply quality (undervoltage, phase failure) should be…
Short-circuit protectionfor shaft furnaces
The short-circuit proof Gefran thyristor controller from TELE increases the availability of plant furnaces, such as a shaft furnaces for gaseous nitriding.
Electronic load shedding relay prevents overloads
TELE relais prevents operation of more than one high-load consumer at a time E1IM10AACL10 When running several electrical consumers simultaneously, such as…
Vacuum furnace short-circuit protection
The short-circuit proof Gefran thyristor controller from TELE increases the availability of plant furnaces, such as vacuum furnaces for heat treatment.