CNC contourcuttingmachine
- Product category:
- Timing Relays
- Applications:
- Industrial Plant
- Machine Tools
- Task:
- Activation and deactivation of a uninterruptible power supply (UPS)
- Solution
- A CNC contour cutting machine for foam materials is powered through a UPS. The UPS system is switched on and off with a gamma timing relay with a single shot leading edge.
- Use/value:
- - Secure power supply for the CNC machine
This might be of interest for you
No entries found.
Pulp manufacturecurrent measurement
Multiple motors are controlled by a frequency converter. The frequency converter can only measure the total current, but not the power draw of the individual…
read more
Lathe chip conveyor
System shutdown in the event of overload and blockage.
read more
Grain storage ventilation system
The drive motor of a mixing feed screw in a grain storage facility is to be protected against incorrect phase sequences when it is connected to the power…
read more
Shredder blockage
A shredder shreds different materials. The current draw when the blades are blocked varies depending on the material.
read more
Save stove shut down
Time relais avoids unsafe condition in case of impact button blockade E1ZM10 24-240 To avoid fire hazard, the stove in the shared kitchen of a residential home…
read more
Mobile communications transmitter station
System faults and failures in mobile communications transmitter stations as a result of poor power supply quality (undervoltage, phase failure) should be…
read more