- Crushers, Shredders
- Industrial Plant
- Current monitoring
- A blockage of the shredder blades should be recognised quickly.
- Monitoring of the permitted current range of the electric blade motor with the “over” function. As soon as the power drawn by the motor leaves the permissible range, for example an overload because the blades are blocked, the relay output is tripped, and a contactor switches the pump off.
- - Rapid shutdown in the event of blockage
- Motor protection
- Minimisation and prevention of downtime
May I help you?
Can't find what you're looking for? Please don't hesitate to contact me.
This might be of interest for you
No entries found.
Manure removal systememergency stop
Monitoring of the manure removal system. The conveyor system must switch off when it is blocked by animals or a stoppage.
Short-circuit protectionfor the manufacture ofglass laboratory flasks
The short-circuit proof Gefran thyristor controller from TELE increases the availability of plant furnaces, such as those used for the manufacture of glass…
Vacuum furnace short-circuit protection
The short-circuit proof Gefran thyristor controller from TELE increases the availability of plant furnaces, such as vacuum furnaces for heat treatment.
Monitoring of a fan motor for V-belt breakage or slippage.
Lathe chip conveyor
System shutdown in the event of overload and blockage.
Portable, 3-phase industrial vacuums that are supplied with power through a plug may not start when the phase sequence is incorrect or a phase has failed.